Five years later, the market demand has steadily increased with increased public perception and battery capabilities. OPERATION TIPSDo not try to override the operation of the start button or start handles. Release either set of start handle and drive lever from the same side. While you hold the start handles , grab either of the drive levers and pull towards the handlebar. Read, know, and do the instructions in the battery and charger manual.
All four wheels must touch the ground while you mow. My 1980 John Deere self propelled 21″ mower is still used by me today. An annual oil change, blade sharpening, and a new spark plug every decade keeps it operational. And, the reason the deck didn’t rust out like this one will is because it’s cast aluminum and not stamped low carbon steel.
Use of safety gloves and proper footwear is recommended when working outdoors. Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Shirts and pants that cover the arms and legs and steel-toed shoes are recommended. Never operate this machine in bare feet, sandals, slippery or lightweight (e.g., canvas) shoes. Repair any damaged parts before restarting and operating the lawnmower.
A self-propelled lawnmower takes most of the manual labor out of mowing your yard because it is powered by a transmission. Typically, this kind of lawnmower runs on gas, though there are some that are cordless electric models as well. You can find self-propelled lawn mowers that come with variable speeds, which the operator controls in order to move the mower forward.
The Greenworks Pro 60V platform is now available at TractorSupply.com and will roll out to stores nationwide over the next few months. To see the full lineup or to check availability at your local store, click here. Durable 21″ cutting deck gets the job done quicker and more efficiently. We are always transparent about where our information comes from so that you don’t have to waste time and money buying the wrong thing. Our reviews and buyers guides are always either based on reviews we’ve done ourselves, or aggregated from trusted sources. The two battery ports work actively—and they switch automatically from one battery to the other.
Many battery-powered mowers require a two-step process of pressing the on button followed by the blade starter handle—in that order. The GreenWorks setup is also two-step, but it doesn’t matter in what order it’s done. It’s not a big thing, but it is one less thing to think about. Tap the Position button at the bottom of the screen to see where the mower is and where it’s been on a satellite map. There’s also a Frost Guard setting that monitors the current temperature and will delay the work cycle if there’s a risk of frost.
The higher airflow also helps prevent clogging when mowing tall or wet grass. Remove the safety key and battery pack from the machine before maintenance. Always remove the safety key and battery pack after you complete the work. Pull the height adjustment lever rearward to increase the cutting height. Keep cutting edges sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.
Greenworks, at its own discretion, will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. Turn nut to the left to remove blade B , spacer , and positioner . Release the start handles and self-propel levers to turn off the headlight. • Pull up on the drive lever , then press the start button . While you hold the start button , grab the start handles in the direction of the handle bar.