Sun Joe SPX3000 Electric Power Washer #1 BEST SELLER 2030

Besides, the cleaning power of its opponent, the SPX3000 unit, includes 2030 PSI of water pressure and 1.76 gallons per minute of water flow. OUR BEST-SELLING PRESSURE WASHER,THE SPX3000 COMBINES POWER, PERFORMANCE, AND VERSATILITY. This pressure washer packs a powerful punch with its 1800-Watt/14.5-amp motor. The Sun Joe SPX3000 electric pressure washer generates up to 2030 PSI of water pressure and 1.76 GPM of water flow.

Attach garden hose to water supply (Fig. 13).WARNING! The intake water temperature must not exceed 104ºF/40ºC. The garden hose must have an internal diameter of at least 13 mm (1/2 in.) and must be reinforced. The water supply must be at least equal to the washer delivery capacity. westinghouse pressure washers To prevent the appliance cord from disconnecting from the extension cord during operation, make a knot with the two cords as shown in Table 1. Provided the car’s paintwork is in good condition, there shouldn’t be an issue using this model as a car pressure washer.

I don’t plan to use detergent and want to ensure it can run while these tanks are empty. One feature that sets the SPX3000 apart from the others is that it has two soap containers with a dial switch to select which one you’d like to draw from. This system makes it a cinch to switch from detergent to a rinsing westinghouse pressure washers agent while washing a vehicle or other grown-up toys, like RVs or boats. The SunJoe was able to hold the bocce ball 3.5 feet up the trough, earning it a decent score for the test. The length of the high-pressure hose, in feet. Longer lengths allow further reach without the need to move the main unit.

Connect the high-pressure hose to the water outlet on the washer (Fig. 11).WARNING! Examine hoses regularly and replace if damaged. Do not cover or modify the stainless steel lance or the spray nozzles in any way. Never pull the pressure washer by the cord or yank the cord to disconnect it from the receptacle. Keep the cord away from heat, oil, and sharp edges. Do not touch the appliance or its plug with wet hands or while standing in water.

sun joe spx 3000

This will allow air to escape and discharge any residual pressure in the hose. Read the owner’s manual and safety instructions carefully before operating the electric pressure sun joe spx 3000 washer. Compare the illustration below to the electric pressure washer in order to familiarize yourself with the location of the various controls and adjustments.

The machine consists of an assembly with a pump, which is encased in a shock-absorbing housing. To provide the operator with an optimal working position, the machine is equipped with a stainless steel lance and a non-slip handle grip, whose shape and configuration comply with applicable regulations. This high-pressure, multi-purpose brush allows you to sweep away dirt, debris grime with the power of water pressure! Compatible with all SPX Series Pressure Washers. Enjoy increased safety, reduced energy usage and extended pump life thanks to the innovative lance trigger design which features a safety switch to prevent accidental discharge and Sun Joe’s innovative Total Stop System .

Release the trigger and engage the gun safety lock. The washer must only be used with clean water; use of unfiltered water containing corrosive chemicals will damage the washer. The machine is not suitable for connection to the potable water main. Connect the high-pressure hose to the trigger gun (Fig. 10). Fit the stainless steel lance into the trigger gun and rotate the collar until the two parts are completely locked (Fig. 9).

Pro-style steel spray wand with 5 quick connect nozzle tips- 0 degrees, 15 degrees, 25 degrees, 40 degrees, and soap applicator nozzle. • Clean the nozzle.Fuse blows• Fuse too small.• Install a fuse with a higher amp rating than the amp consumption of the machine. Try the unit without an extension cord.Machine pulsating• Air in inlet hose.• Inadequate supply of mains water. • Defective extension cord.• Check to make sure machine is plugged into a working outlet.• Check the power cord and reset the GFCI. Damage may occur to painted surfaces if the detergent is allowed to dry on the surface. Avoid working on hot surfaces or in direct sunlight.Rinsing with the Pressure Washer 1.

The foam cannon is featured with a foam-volume adjustable knob. Follow the instructions as shown to use the foam-volume adjustable knob (Fig. 22).Apply detergent from the bottom to the top of the dry surface to be cleaned. Applying detergent in this manner will dissolve dirt most effectively.